BDS Lift Kit 2in Coilover Kit w/FOX Shocks

At the heart of these 2in coilover systems include a pair of specially tuned FOX 2.0 performance series IFP coilovers. These non-reservoir coilovers are preset for the correct lift height right out of the box and use a threaded body to allow preload adjustment. They are a direct bolt-in replacement for the factory strut assemblies and improve damper performance featuring a 2.0in extruded and machined 6061 T6 aluminum body for better heat dispersion, along with an internal floating piston (IFP) to eliminate oil aeration, FOXfts proprietary internals, 5/8in hard chrome plated heat treated alloy shaft all preloaded with coil springs ready for easy installation. Also supplied as part of these complete 2in lift system are a pair of BDS performance series upper control arms (UCA). These UCAs improve suspension travel and while providing superior strength and styling to the factory arms. These arms are built from 1.5in OD heavy wall tubing, fully welded with integrated support gussets. They include brake line mounting tabs and use an indexed ball joint cup to correct ball joint positioning back to the neutral position at ride height. The BDS arms come fully assembled with OE-style rubber bushings for the frame mounts and a high-quality MOOG ball joint for smooth, quiet operation and better durability than arms that use heims and uniballs. In the rear a pair of specially tuned FOX 2.0 performance series IFP shocks designed to pair with the front coilovers for impressive performance on and offroad to allow clearance for 33in tires under Tundra.

Kit Components

BDS128253: Upper Control Arm X1

FOX98224700: FOX 2.0 Shock Absorber X2

FOX98502004: FOX 2.0 Shock Absorber X2