BDS Lift Kit 6in Radius Arm w/Rear Block - Diesel w/FOX Shocks

These 6in systems upgrade the factory stamped steel radius arms to high strength tubular radius arms allowing for caster control and superior strength. Full length 6in ProRide diesel or gas specific coil springs are used for the additional ride height paired with your choice of BDS NX2 series gas shocks or FOX 2.0 IFP performance gas shocks for a smooth ride on any terrain. A forged drop pitman arm and heavy duty track bar relocation bracket are supplied to correct steering angles and recenter the front axle. Also supplied for the front are bump stop extensions to limit suspension compression, sway bar drop brackets to correct the sway bar positioning, and brake line relocation brackets. At 6in of lift driveline adjustments are necessary so a precision built transfer case indexing ring is supplied to improve front driveline operating angle. Additionally a high clearance transmission crossmember is supplied. In the rear of these 6in lift systems are replacement rear lift blocks to level out the stance. Additionally high strength black e-coated u-bolts are supplied specific to the DRW axle along with a pair of matching NX2 or FOX 2.0 gas shocks to compliment the front setup for all around impressive performance.

Kit Components

BDS013526: 5in Block Kit X1

BDS013603: 6in Radius Arm Front Box X1

BDS033611: 6in Diesel Coils X1

BDS123251: Radius Arm Box Kit X1

BDS123605: Transfer Case Indexing Kit X1

BDS85431: NX2 Single Stabilizer X1

FOX98224750: FOX 2.0 Shock Absorber X2

FOX98224718: FOX 2.0 Shock Absorber X2